Hobby-Lobby
B6-PRO 80 WATT BALANCE CHARGER FOR 1-6 LIPO CELLS
Operating voltage range | DC 11.0~18.0 Volt |
Charge current range | 0.1~5.0A |
Discharge current range | 0.1-2.0A |
Current drain for balancing Li-po | 300 mAh/cell |
NiCd/NiMH battery cell count | 1-15 cells |
Li-ion/Polymer cell count | 1-6 series |
Pb battery voltage | 2V, 20V |
5-5/8" x 3-3/8" x 1-3/8". Multi-use charger for 1-6 Li-Ion/LiPo/LiFe cells, 1-15 NiCd/NiMH cells, and Pb 2-20V. Includes adapters for "Deans" style plugs, JST, Rx pack, glow plug lighter, and alligator clips. Balance plugs on end of unit are JST-XH type and are compatible with many Asian battery packs. NOTE: when balance charging Lithium batteries, both the balance tap and the main power wires must be connected to the charger., B6-Pro Includes:, Internal independent lithium battery balancer:, Employs an individual-cell-voltage balancer to maintain your pack in balance while charging., Balance individual cells during discharge:, During the discharge process, B6-Pro can monitor and balance each cell of the pack individually. An error message will sound and the process will end automatically if the voltage of any single cell is abnormal., Fast and Storage mode charging:, "Fast" charge will fully charge a lipoly battery in the shortest time. "Store" setting will charge the battery at approximately a 50% charge for long term storage. This prolongs the useful life of the battery pack., Charges various types of LiPoly cells:, Includes charging programs for LiFe (A123), Li-Ion, and LiPo battery types., Data store/load:, Up to 5 batteries' data can be stored for easy programming., Cyclic charging/discharging:, 1-5 cycles of either charge>discharge or dischage>charge is possible., B6-Pro Specs:, Circuit power:, Max. charge power 80W,
Balance charges 1-6 Lithium cells at up to 5A B6-Pro ...Hobby-Lobby
AC/DC 50W BALANCE CHARGER
Specifications | AC Input |
DC Input | 11-18V |
Charge current | .1-6A (50w Max) |
Discharge current | .1-1A (5A Max) |
NiCD/NiMH Cells | 1-15 |
Lipo/LiFe/LiIo Cells | 1-6 |
Pb battery voltage | 2-20V |
Weight | 433g |
Dimensions | 135x112x60.9mm |
Hobby-Lobby
B6 DUO TWO-200W BALANCE CHARGERS IN ONE
Operating voltage range | 11-18V DC |
Current drain for balancing | 200mA/cell |
LiPo/LiFe/LiIon Cell Count | 1-6 cells |
NiMH/MiCd | 1-18 cells |
USB Port | 5V 1A continuous |
Weight | 727g |
Jason Says:, "What do you get when you stuff two 200W chargers in box? This charger. Works great for charging those huge batteries used in giant scale aircraft.", Charger monitor program disc is included and the USB cable to connect the charger to your computer, allowing the user PC-based analysis of the charge process and the health of their battery packs (charge port #1 only). The charge also includes a USB power supply 5V/1A suitable for charging your FlyCam, cell phone or running your iPod. NOTE: when balance charging Lithium batteries, both the balance tap and the main power wires must be connected to the charger., B6 Duo Two-200W Includes:, Dual 200W balance charger w/4mm banana plug inputs, B6 Duo Two-200W Specs:, Circuit power (each):, Max charge power 200W - Max discharge power 25W, Charging current range:, 0.1A -10A (2 x 200W max.), Discharge current range:, 0.1A-5.0A (2 x 25W max.),
Less time charging---More time flying 8" x 5-1/2" x 2-1/4". ...Hobby-Lobby
AC/DC 50W BALANCE CHARGER
Specifications | AC Input |
DC Input | 11-18V |
Charge current | .1-6A (50w Max) |
Discharge current | .1-1A (5A Max) |
NiCD/NiMH Cells | 1-15 |
Lipo/LiFe/LiIo Cells | 1-6 |
Pb battery voltage | 2-20V |
Weight | 433g |
Dimensions | 135x112x60.9mm |
Hobby-Lobby
B6-PRO 80 WATT BALANCE CHARGER FOR 1-6 LIPO CELLS
Operating voltage range | DC 11.0~18.0 Volt |
Charge current range | 0.1~5.0A |
Discharge current range | 0.1-2.0A |
Current drain for balancing Li-po | 300 mAh/cell |
NiCd/NiMH battery cell count | 1-15 cells |
Li-ion/Polymer cell count | 1-6 series |
Pb battery voltage | 2V, 20V |
5-5/8" x 3-3/8" x 1-3/8". Multi-use charger for 1-6 Li-Ion/LiPo/LiFe cells, 1-15 NiCd/NiMH cells, and Pb 2-20V. Includes adapters for "Deans" style plugs, JST, Rx pack, glow plug lighter, and alligator clips. Balance plugs on end of unit are JST-XH type and are compatible with many Asian battery packs. NOTE: when balance charging Lithium batteries, both the balance tap and the main power wires must be connected to the charger., B6-Pro Includes:, Internal independent lithium battery balancer:, Employs an individual-cell-voltage balancer to maintain your pack in balance while charging., Balance individual cells during discharge:, During the discharge process, B6-Pro can monitor and balance each cell of the pack individually. An error message will sound and the process will end automatically if the voltage of any single cell is abnormal., Fast and Storage mode charging:, "Fast" charge will fully charge a lipoly battery in the shortest time. "Store" setting will charge the battery at approximately a 50% charge for long term storage. This prolongs the useful life of the battery pack., Charges various types of LiPoly cells:, Includes charging programs for LiFe (A123), Li-Ion, and LiPo battery types., Data store/load:, Up to 5 batteries' data can be stored for easy programming., Cyclic charging/discharging:, 1-5 cycles of either charge>discharge or dischage>charge is possible., B6-Pro Specs:, Circuit power:, Max. charge power 80W,
Balance charges 1-6 Lithium cells at up to 5A B6-Pro ...Hobby-Lobby
SKYRC B6 ULT 400 WATT 20 AMP CHRGR
Operating Voltage Range | DC 12.0-18.0 V |
Max. Charge Power | 400W |
Max. Discharge Power | 25W |
Net Weight | 720g |
Dimensions | 145x141x60mm |
Key Features:,
SkyRC B6 Ult 400 Watt 20 Amp Chrgr Ultimate 400W ...Hobby-Lobby
X2 ULTIMA 2-CHANNEL DC CHARGER
Input | DC 11-18V 30A |
Length | 8.2 in (200mm) |
Width | 5.3 in (135mm) |
Height | 2.2 in (57mm) |
X2 Ultima 2-Channel DC Charger Highlights:, Compatible with 1-6 cell LiPo, Li-Ion, LiFe, 1-18 cell NiMH, NiCd and 1-12 cells Pb (lead) batteries, Technical Specifications:, X2 Ultima 2-Channel DC Charger Specs:, Current Discharge:, 0.1~5.0A (max 25W, total 50W), Charge Rate:, 0.1~10.0A (max 200W, total 400W), Output Connector:, 4mm banana plug with 12 AWG wire, Battery Type:, 1-6 cell LiPo, Li-Ion, LiFe, 1-18 cell NiMH, NiCd and 1-12 cells Pb,
X2 Ultima 2-Channel DC Charger System functions as a charger, ...Hobby-Lobby
AC/DC 50W BALANCE CHARGER
Specifications | AC Input |
DC Input | 11-18V |
Charge current | .1-6A (50w Max) |
Discharge current | .1-1A (5A Max) |
NiCD/NiMH Cells | 1-15 |
Lipo/LiFe/LiIo Cells | 1-6 |
Pb battery voltage | 2-20V |
Weight | 433g |
Dimensions | 135x112x60.9mm |
Hobby-Lobby
B6 DUO TWO-200W BALANCE CHARGERS IN ONE
Operating voltage range | 11-18V DC |
Current drain for balancing | 200mA/cell |
LiPo/LiFe/LiIon Cell Count | 1-6 cells |
NiMH/MiCd | 1-18 cells |
USB Port | 5V 1A continuous |
Weight | 727g |
Jason Says:, "What do you get when you stuff two 200W chargers in box? This charger. Works great for charging those huge batteries used in giant scale aircraft.", Charger monitor program disc is included and the USB cable to connect the charger to your computer, allowing the user PC-based analysis of the charge process and the health of their battery packs (charge port #1 only). The charge also includes a USB power supply 5V/1A suitable for charging your FlyCam, cell phone or running your iPod. NOTE: when balance charging Lithium batteries, both the balance tap and the main power wires must be connected to the charger., B6 Duo Two-200W Includes:, Dual 200W balance charger w/4mm banana plug inputs, B6 Duo Two-200W Specs:, Circuit power (each):, Max charge power 200W - Max discharge power 25W, Charging current range:, 0.1A -10A (2 x 200W max.), Discharge current range:, 0.1A-5.0A (2 x 25W max.),
Less time charging---More time flying 8" x 5-1/2" x 2-1/4". ...Hobby-Lobby
B6-PRO 80 WATT BALANCE CHARGER FOR 1-6 LIPO CELLS
Operating voltage range | DC 11.0~18.0 Volt |
Charge current range | 0.1~5.0A |
Discharge current range | 0.1-2.0A |
Current drain for balancing Li-po | 300 mAh/cell |
NiCd/NiMH battery cell count | 1-15 cells |
Li-ion/Polymer cell count | 1-6 series |
Pb battery voltage | 2V, 20V |
5-5/8" x 3-3/8" x 1-3/8". Multi-use charger for 1-6 Li-Ion/LiPo/LiFe cells, 1-15 NiCd/NiMH cells, and Pb 2-20V. Includes adapters for "Deans" style plugs, JST, Rx pack, glow plug lighter, and alligator clips. Balance plugs on end of unit are JST-XH type and are compatible with many Asian battery packs. NOTE: when balance charging Lithium batteries, both the balance tap and the main power wires must be connected to the charger., B6-Pro Includes:, Internal independent lithium battery balancer:, Employs an individual-cell-voltage balancer to maintain your pack in balance while charging., Balance individual cells during discharge:, During the discharge process, B6-Pro can monitor and balance each cell of the pack individually. An error message will sound and the process will end automatically if the voltage of any single cell is abnormal., Fast and Storage mode charging:, "Fast" charge will fully charge a lipoly battery in the shortest time. "Store" setting will charge the battery at approximately a 50% charge for long term storage. This prolongs the useful life of the battery pack., Charges various types of LiPoly cells:, Includes charging programs for LiFe (A123), Li-Ion, and LiPo battery types., Data store/load:, Up to 5 batteries' data can be stored for easy programming., Cyclic charging/discharging:, 1-5 cycles of either charge>discharge or dischage>charge is possible., B6-Pro Specs:, Circuit power:, Max. charge power 80W,
Balance charges 1-6 Lithium cells at up to 5A B6-Pro ...Hobby-Lobby
AC/DC 50W BALANCE CHARGER
Specifications | AC Input |
DC Input | 11-18V |
Charge current | .1-6A (50w Max) |
Discharge current | .1-1A (5A Max) |
NiCD/NiMH Cells | 1-15 |
Lipo/LiFe/LiIo Cells | 1-6 |
Pb battery voltage | 2-20V |
Weight | 433g |
Dimensions | 135x112x60.9mm |
Hobby-Lobby
AC/DC 50W BALANCE CHARGER
Specifications | AC Input |
DC Input | 11-18V |
Charge current | .1-6A (50w Max) |
Discharge current | .1-1A (5A Max) |
NiCD/NiMH Cells | 1-15 |
Lipo/LiFe/LiIo Cells | 1-6 |
Pb battery voltage | 2-20V |
Weight | 433g |
Dimensions | 135x112x60.9mm |
Hobby-Lobby
TAZER 15T FORWARD/REVERSE ESC
Forward | Yes |
Reverse | Yes |
Brake | Yes |
Time Delay Brake | Yes |
Continuous Maximum Current | 250 amperes |
Length | 1.25 in (38.6mm) |
Width | 1.02 in (26.2mm) |
Height | .888 in (22.5mm) |
Weight | 1.2 oz (34 g) |
PWM Frequency | 2kHz |
Overload Protection | Yes Thermal |
Full On Resistance | 0.0014 ohms |
Cells w/BEC | 5V DC, 1 amp max. |
Tazer 15T Forward/Reverse ESC Highlights:, High power, proportional FET control, Technical Specifications:, Tazer 15T Forward/Reverse ESC Specs:, Input Voltage:, 4-cell (4.8 volts) to 7-cell (8.4 volts) DC Ni-MH 2S (7.4 volts) Li-Po,
Dynamite's new Tazerâ„¢ is a high-frequency, fully-proportional electronic speed control ...Hobby-Lobby
VECTOR FORCE KIT SKILL LEVEL 1
Requires | Assembly |
Technical Specifications | Skill Level |
Length | 28.25" (718mm) |
Diameter | 1.33" (34mm) |
Weight | 2.36oz (67g) |
Recovery | 18" parachute |
Max Altitude | 725ft (221m) |
Includes:, Ready to fly up to 725 feet high.,
Vector Force Kit Skill Level 1 This is the Vector ...Hobby-Lobby
SPACE EAGLE KIT SKILL LEVEL 1
Requires | Assembly |
Technical Specifications | Skill Level |
Length | 26.75" (679mm) |
Diameter | .98" (25mm) |
Weight | 2.2oz (62.4g) |
Recovery | 12" parachute |
Max Altitude | 975ft (297m) |
Features:, Ready to fly up to 975 feet high.,
Space Eagle Kit Skill Level 1 This is the Space ...